As one of the most common problems faced by homeowners, clogs in the kitchen sink or backups in the shower drains can easily dampen your drain. If there is one thing in your mind that you would not want to do, it is spending hours trying to get your plumbing back in order and failing to do so. However, the best solution to most of your drainage problems is in snaking the drain properly. So, today, let us check out how you can snake a drain like professionals.

When Should You Snake Your Drain?

Knowing how to snake your drain is crucial, especially when you’re facing a plumbing emergency. A hand auger, also known as a drain snake, is a tool that is used to clean out clogs in smaller drains such as kitchen sinks or the bathroom. If you are dealing with the toilet, you would need a larger snake. Typically, regular debris such as soap scum, hair, or food can clog up the smaller drains, mostly the u-shaped tap beneath the sink. Since these are typically minor issues, they can be solved with a snake drain fix. If the clog is more solid and cannot be removed with the snake drain, an expert in drainage plumbing Mandurah can help you with the same.

How to Snake Your Drain?

Now, not all of you know how to snake the drain, and if you don’t do it correctly, you might end up with a bigger problem in your hands. Some of the tricks you need to note for snaking your drain include:

  1. Top Tools You Would Need: To complete the drain snaking job flawlessly, you would need the perfect drain snake. For the minor issues, a coat hanger can do the trick as you disassemble the same to turn it into a straight strip with a hook shape on the end. However, if it is an intense clog, you would have to get your hands on a general 3 to 8 inch 20 feet long model. You would also need a plastic bucket that would fit under the drain and a pair of rubber gloves.
  2. Use the Drain Snake Properly: Well, one look at the drain snake, and you might think that you can do it all by yourself without any manual. That is where you are wrong. To snake your drain, you need to follow a specific procedure to ensure you get the best results. So, first off, remove the hair trap or tub screen covering your drain. Then, push the cable into the drain and turn the handle in a slow clockwise motion. Try to hold the handle with both hands if you feel like you’re facing difficulty pushing. If you hear a fair bit of scratching, it is because you are coming across a curve in the pipe, and you can still keep going. Finally, you have to hook the clog and pull it up. Once you feel more weight while pulling it up, you would know that you have caught hold of a fair bit of debris.  
  3. Use Hot Water & a Homemade Solution: In case even after this procedure you feel the drain is clogged, you must run hot water through it. Fill a standard kettle with water and when it is almost boiling; slowly start pouring it down the drain. You can also make a homemade solution of half a cup of baking soda and a cup of vinegar to the hot water and then pour it. This time, you need to wait for 15 minutes, allowing it to sit before pouring more water to see if the clog has cleared up.

Conclusion: Drainage plumbing experts know exactly how to snake your drain in a way that it doesn’t harm your pipes and still manages to remove all the debris from the same. This not only saves you a lot of time but also ensures you save money. QA Plumbing is a company run by the most skilled experts of drainage plumbing MandurahTo know more about snaking your drain, you can get in touch with the experts right away.



Comments 0

Leave a Comment